DSpace
 

EPrints@IIT Delhi >
Faculty Research Publicatons  >
Industrail Tribology Machine Dynamics [ITMMEC] >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1088

Full metadata record

DC FieldValueLanguage
dc.contributor.authorBijwe, J-
dc.contributor.authorIndumathi, J-
dc.contributor.authorGhosh, A K-
dc.date.accessioned2005-12-30T04:26:43Z-
dc.date.available2005-12-30T04:26:43Z-
dc.date.issued2002-
dc.identifier.citationWear, 253(7-8), 768-777en
dc.identifier.urihttp://eprint.iitd.ac.in/dspace/handle/2074/1088-
dc.description.abstractThe potential of fabric reinforcement in the thermoplastic polymers for enhancing the abrasive wear resistance has not been explored so far. Hence a series of seven composites of polyetherimide (PEI) reinforced with three types of fabrics viz. glass (with three different weaves), carbon and aramid (Kevlar 29) was fabricated and abrasive wear performance of these composites along with the neat polymer was evaluated. A polymer pin was abraded against silicon carbide (SiC) abrasive paper under various loads and two fabric orientations. It was observed that the aramid fabric (AF) revealed significant potential to improve abrasive the wear performance of PEI. When the fabric was perpendicular to the abrading surface, performance of the composites was substantially better than the case when it was in the parallel orientation. Carbon fabric (CF) and glass fabric also showed some potential for enhancing the wear resistance of PEI when the fabric was in the perpendicular orientation. The mechanical properties of the composites, however, could not be correlated with the wear performance. Worn surface analysis by SEM on the other hand, helped to correlate the performance of the composites with the surface topography, failure of fibres, resin and their interface. Difference in the failure mode of the fibres was thought to be mainly responsible for controlling the wear performance of the composites.en
dc.format.extent1384241 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoenen
dc.subjectAbrasive wear behaviouren
dc.subjectPolyetherimide compositesen
dc.subjectFabric reinforcementen
dc.titleOn the abrasive wear behaviour of fabric-reinforced polyetherimide compositesen
dc.typeArticleen
Appears in Collections:Industrail Tribology Machine Dynamics [ITMMEC]

Files in This Item:

File Description SizeFormat
bijwethe2002.pdf1.35 MBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback