EPrints@IIT Delhi >
Faculty Research Publicatons  >
Physics >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1133

Full metadata record

DC FieldValueLanguage
dc.contributor.authorSharma, Navneet K-
dc.contributor.authorGupta, B D-
dc.identifier.citationOptics Communications, 21(4-6), 299-303en
dc.description.abstractFabrication and characterization of side-polished single mode optical fiber pH sensor utilizing evanescent field absorption spectroscopy and dye doped sol–gel immobilization technology are presented. The sensor is prepared by fixing the fiber in a groove made on one of the surfaces of a fused silica block. To make the surface sensitive to pH it is polished up to the core of the fiber and a film containing a mixture of three pH sensitive dyes is coated on it using sol–gel technology. The influence of the radius of curvature of the groove on the sensitivity of the sensor is studied. The decrease in the radius of curvature of the groove increases the sensitivity. This occurs due to the increase in the evanescent field and hence its interaction with the pH sensitive dyes entrapped in the film. The advantage of the side-polished single mode optical fiber sensor is that only 0.1 ml of sample is sufficient to measure the pH of the fluid. This is important when the procurement of the sample in large quantity is not possible.en
dc.format.extent76831 bytes-
dc.subjectOptical fiberen
dc.subjectSide polished half blocken
dc.titleFabrication and characterization of pH sensor based on side polished single mode optical fiberen
Appears in Collections:Physics

Files in This Item:

File Description SizeFormat
sharmafab2003.pdf75.03 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback