DSpace
 

EPrints@IIT Delhi >
Faculty Research Publicatons  >
Industrail Tribology Machine Dynamics [ITMMEC] >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1155

Title: Three-body abrasive wear behaviour of polyaryletherketone composites
Authors: Harsha, A P
Tewari, U S
Venkatraman, B
Keywords: Three-body abrasive wear
Polyaryletherketone
Composites
Scanning electron microscopy
Issue Date: 2003
Citation: Wear, 254(7-8), 680-692
Abstract: An experimental investigation was carried out to study the effect of reinforcement fibres, solid lubricants, mass of abrasives and load in three-body abrasive wear situations on various polyaryletherketone (PAEK) matrix. Three-body abrasive wear studies were carried out using a rubber wheel abrasion test (RWAT) rig. In the present investigation, angular silica sand particles of size ranging between 150 and 300 μm were used as dry and loose abrasives. The ketone/ether ratios among the selected PAEKs have shown significant influence on three-body abrasive wear behaviour at higher load. It was observed that fibre reinforcement is detrimental to the abrasive wear resistance of neat PAEK matrix. A combination of fibre and particulate filler is more detrimental to abrasive wear performance. Efforts were made to correlate the abrasive wear performance of the composites with appropriate mechanical properties. The Ratner–Lancaster plot showed a linear correlation. Scanning electron microscopy was used to observe the worn surfaces and to understand the mechanisms involved in the removal of the material.
URI: http://eprint.iitd.ac.in/dspace/handle/2074/1155
Appears in Collections:Industrail Tribology Machine Dynamics [ITMMEC]

Files in This Item:

File Description SizeFormat
harshathr2003.pdf1.6 MBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback