EPrints@IIT Delhi >
Faculty Research Publicatons  >
Electrical Engineering >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1892

Title: Active power filter with sliding mode control
Authors: Singh, B
Al-Haddad, K
Chandra, A
Keywords: active power filter
insulated-gate bipolar transistor
voltage source inverter
sliding mode controller
pulse width modulation
single-phase diode
Issue Date: 1997
Citation: Generation, Transmission and Distribution, IEE Proceedings, 144(6), 564 - 568p.
Abstract: The paper presents an active power filter (APF) to eliminate harmonics and to compensate reactive power and neutral current of three-phase four-wire symmetrical and unbalanced nonlinear loads. A set of three single-phase insulated-gate bipolar transistor (IGBT)-based voltage source inverter (VSI) bridges with a common DC bus capacitor is used as the APF. A sliding mode controller (SMC) over the average DC bus voltage is used for the control. A hysteresis rule bused carrierless pulse width modulation (PWM) current control is employed to generate the gating signals to the switching devices. A set of three single-phase diode bridge rectifiers with capacitive-resistive loading is used for nonlinear loading. The simulation results show that the APF is capable of compensating reactive power. Neutral current and load unbalance and reducing the harmonic level below the limit specified in IEEE-519 standard
URI: http://eprint.iitd.ac.in/dspace/handle/2074/1892
Appears in Collections:Electrical Engineering

Files in This Item:

File Description SizeFormat
singhact1997.pdf64.8 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback