EPrints@IIT Delhi >
Faculty Research Publicatons  >
Electrical Engineering >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1892

Full metadata record

DC FieldValueLanguage
dc.contributor.authorSingh, B-
dc.contributor.authorAl-Haddad, K-
dc.contributor.authorChandra, A-
dc.identifier.citationGeneration, Transmission and Distribution, IEE Proceedings, 144(6), 564 - 568p.en
dc.description.abstractThe paper presents an active power filter (APF) to eliminate harmonics and to compensate reactive power and neutral current of three-phase four-wire symmetrical and unbalanced nonlinear loads. A set of three single-phase insulated-gate bipolar transistor (IGBT)-based voltage source inverter (VSI) bridges with a common DC bus capacitor is used as the APF. A sliding mode controller (SMC) over the average DC bus voltage is used for the control. A hysteresis rule bused carrierless pulse width modulation (PWM) current control is employed to generate the gating signals to the switching devices. A set of three single-phase diode bridge rectifiers with capacitive-resistive loading is used for nonlinear loading. The simulation results show that the APF is capable of compensating reactive power. Neutral current and load unbalance and reducing the harmonic level below the limit specified in IEEE-519 standarden
dc.format.extent66352 bytes-
dc.subjectactive power filteren
dc.subjectinsulated-gate bipolar transistoren
dc.subjectvoltage source inverteren
dc.subjectsliding mode controlleren
dc.subjectpulse width modulationen
dc.subjectsingle-phase diodeen
dc.titleActive power filter with sliding mode controlen
Appears in Collections:Electrical Engineering

Files in This Item:

File Description SizeFormat
singhact1997.pdf64.8 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback