DSpace
 

EPrints@IIT Delhi >
Faculty Research Publicatons  >
Electrical Engineering >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/1907

Title: A frequency response method to estimate inductance profile of switched reluctance motor
Authors: Murthy, S S
Singh, B
Sharma, V Kumar
Keywords: switched reluctance motor
stator resistance
rotor positions spanning
rotor pole pitch
Issue Date: 1997
Citation: Power Electronics and Drive Systems, Proceedings, International Conference on, 1, 181 - 187p.
Abstract: Inductance profile has an important bearing on the performance of a switched reluctance motor (SRM). This paper presents the results of a frequency response method to estimate the inductance profile of SRMs. The stator winding is energized by a variable voltage variable frequency supply. An approximate equivalent circuit incorporating stator resistance, winding inductance and loss component has been used to estimate the inductance at different rotor positions. The inductance value is obtained over a band of rotor positions spanning one rotor pole pitch. Supply frequency is varied from 10 Hz to 55 Hz. The method is found to be simpler to the one using DC switching and processing of transient response. Interestingly, inductance at any given rotor position is not found to be sensitive to excitation frequency. However, as could be expected, core loss under test condition is very sensitive to supply frequency. Typical test results on a 4 kW, 8/6 pole, 4 phase SRM are presented and discussed
URI: http://eprint.iitd.ac.in/dspace/handle/2074/1907
Appears in Collections:Electrical Engineering

Files in This Item:

File Description SizeFormat
murthyfre1997.pdf93.76 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback