DSpace
 

EPrints@IIT Delhi >
Faculty Research Publicatons  >
Textile Technology >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/2342

Full metadata record

DC FieldValueLanguage
dc.contributor.authorGupta, V B-
dc.contributor.authorRadhakrishnan, J-
dc.contributor.authorSett, S K-
dc.date.accessioned2006-12-06T09:00:11Z-
dc.date.available2006-12-06T09:00:11Z-
dc.date.issued1994-
dc.identifier.citationPolymer, 35 (12), 2560-2567p.en
dc.identifier.urihttp://eprint.iitd.ac.in/dspace/handle/2074/2342-
dc.description.abstractAxially oriented poly(ethylene terephthalate) fibres and films with widely differing processing histories were prepared by varying the spinning speed in the case of fibres and the speed, temperature, medium and extent of drawing for both fibres and films. The samples were held at constant length and heated to temperatures between 60 and 220°C with simultaneous recording of their thermomechanical response for up to 20 s. Samples produced at low speeds developed low shrinkage stress, which decayed with time. On the other hand, samples produced at relatively higher speeds developed higher shrinkage stress, which showed little relaxation with time. The structural basis of these results is discussed, and the roles played by processing parameters highlighted.en
dc.format.extent339391 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoenen
dc.subjectshrinkage stressen
dc.subjectpoly(ethylene terephthalate)en
dc.subjectorientationen
dc.titleEffect of processing history on shrinkage stress in axially oriented poly (ethylene terephthalate) fibres and filmsen
dc.typeArticleen
Appears in Collections:Textile Technology

Files in This Item:

File Description SizeFormat
guptaeff94.pdf331.44 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback