EPrints@IIT Delhi >
Faculty Research Publicatons  >
Applied Mechanics >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/441

Full metadata record

DC FieldValueLanguage
dc.contributor.authorGupta, N K-
dc.contributor.authorMadhu, V-
dc.identifier.citationInternational Journal of Impact Engineering, 19(5-6), 395-414en
dc.description.abstractAn experimental study of the normal and oblique impact of armour-piercing projectiles on single and layered plates of mild steel, RHA steel and aluminium is presented. The projectiles were fired at an impact velocity of ~800-880 m s -1. The plate thickness varied in the range 4.7--40 mm and the ratio of the plate thickness to the diameter of the projectile varied in the range 0.75--6.5 for single plates and up to 13 for layered plates. Observations on target damage and measurements of incident and residual velocities and the angles in normal and oblique impact are presented. Determination of plate thickness t*, for which the incident velocity is the ballistic limit, is considered and influences of various parameters, like plate material and its thickness, on t* and the residual velocity are discussed. Relations are developed to determine the residual velocity for a plate of thickness less than t*, and to relate t* with the hardness of the material. Results for the residual velocity obtained from these relations are compared with those from the experiments.en
dc.format.extent505065 bytes-
dc.subjectnormal impacten
dc.subjectoblique impacten
dc.titleAn experimental study of normal and oblique impact of hard-core projectile on single and layered platesen
Appears in Collections:Applied Mechanics

Files in This Item:

File Description SizeFormat
guptaexp97.pdf493.23 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback