EPrints@IIT Delhi >
Faculty Research Publicatons  >
Physics >

Please use this identifier to cite or link to this item: http://eprint.iitd.ac.in/handle/2074/699

Full metadata record

DC FieldValueLanguage
dc.contributor.authorYashwant Kumar-
dc.contributor.authorVinay Kumar-
dc.contributor.authorJain, Kamlesh K-
dc.contributor.authorKashyap, Subhash C-
dc.identifier.citationSensors and Actuators B, 55(2-3), 217–221en
dc.description.abstractThis paper describes the performance of an alternative capacitive pressure gauge using lead iron tungstate as a capacitive element over a pressure range of 418 MPa. A commercial strain gauge pressure transducer is used to get the consistency in the calibration equation of the pressure transducer using the piston gauge pressure standard when compared with the calibration equation of the pressure transducer obtained using the capacitive pressure gauge. A close agreement better than 1=10-3 (over all accuracy of the pressure transducer is -5=10-3) demonstrate for the first time the use of the capacitive pressure gauge as a reliable pressure standard where the required accuracy in the pressure measured is below 1=10-3.en
dc.format.extent196323 bytes-
dc.subjectPressure measurementsen
dc.subjectPressure standardsen
dc.subjectHydraulic pressuresen
dc.titleA capacitive pressure gauge as a reliable transfer pressure standarden
Appears in Collections:Physics

Files in This Item:

File Description SizeFormat
kumarcap1999.pdf191.72 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback