• Experimental and numerical studies on flat structural panels 

  Amit Kumar (IIT Delhi, 2020)

• Flow characteristics of an inline slot conical ejector diffuser : An infrared suppression device 

  Singh, Lakhvinder (IIT Delhi, 2020)

• Improvement of hydrodynamic efficiency of full-Scale composite marine propellers in off-design conditions using smart material actuation 

  Das, Himalaya Nirjhar (IIT Delhi, 2019)

• Biomechanical investigation of the effect of extra corporeal irradiation on resected human bone 

  Chauhan, Sakshi (IIT Delhi, 2019)

• Computational Investigation of Flow and Heat Transfer Characteristics of Turbulent Slot Jet Impingement on a Heated Plate using LES and RANS Modelling 

  Shukla, Anuj Kumar (IIT Delhi, 2019)

• Analysis of polymeric polycentric prosthetic knee joint” 

  Ranjeet Kumar (IIT Delhi, 2019)

• Static and dynamic stability analyses of variable stiffness composite panels 

  Rasool, Mehnaz (IIT Delhi, 2019)

• Fracture behavior of aluminum/alumina and aluminum/boron carbide functionally graded materials 

  Pandey, Vinod Kumar (IIT Delhi, 2019)

• Nonlinear static and dynamic analyses of thin-walled composite structures 

  Emarti Kumari (IIT Delhi, 2019)

• Modelling of nanostructures using second-order strain gradient nonlocal theory 

  Babu, Bishweshwar (IIT Delhi, 2019)

• Analytical solutions for three dimensional edge stress field in elastic and smart piezoelectric laminates with weak interfaces 

  Dhanesh N (IIT Delhi, 2019)

• Micromechanical modelling of elastic and strength properties of snow from micro - tomographic images 

  Srivastava, Praveen Kumar (IIT Delhi, 2019)

• Storm water drainage design-changing trends in rainfall intensity with climate change in India 

  Chaurasia, Vijai Kumar (IIT Delhi, 2019)

• Investigating dynamic response of thin sheet structures towards high rate of loading 

  Iqbal, Danish (IIT Delhi, 2019)

• Weldability and mechanical characterization of a precipitation hardened creep resistant stainless steel 

  Shrivastava, Dharmendra Kumar (IIT Delhi, 2019)

• Low velocity impact on glass fibre reinforced epoxy composites: experiments and simulation 

  Namala, Kiran Kumar (IIT Delhi, 2016)

• Cumulative changes in basic properties associated with low-cycle fatigue 

  Mukhopadhyay, Apurba Kumar (IIT Delhi, 1969)

• Design and studies of fluidic OR/NON elements and their application in the design and development of a numerically controlled coordinatograph 

  Shetty, Devdas (IIT Delhi, 1974)

• Unusual coupled deformation and supercoiling in elastic rods with application to biomolecules 

  Singh, Raushan (IIT, Delhi, 2019)

• Computational study of phase change and melt turbulence using PANS modelling in solidification systems 

  Verma, Sudeep (IIT Delhi, 2019)

• Hyperviscoelastic constitutive modelling and crack propagation behavior of solid propellant 

  Nomesh Kumar (IIT Delhi, 2018)

• Response of ship structures subjected to underwater explosion 

  Rao, S. Koteshwar (2018)

• Dynamic response and probabilistic analysis of composite risers 

  Singh, Manander (2018)

• Effects of some geometrical and dynamical parameters on the flow characterstics of V-cone flowmeter 

  Sheikh, Nasiruddin (2018)

• Finite-amplitude stability of pipe-poiseuille flow to three-dimensional non-axisymmetric disturbances 

  Subhasis, Maji (1983)

• Study of the ship airwake-helodeck flow field for safe helo operations 

  Praveen B. (2018)

• Analysis of flat and curved panels using element free galerkin method 

  Watts, Gaurav (2018)

• Elasticity of one-dimensional nanostructures - a multiscale approach 

  Gupta, Prakhar (2018)

• AFM based force-spectroscopy of soft-materials : polymer gels and biological cells 

  Managuli, Vishwanath (2018)

• Development of grain boundary precipitate free zone(pfz) and its effect on mechanical properties of a Mg-8Al-0.5Zn alloy 

  Zindal, Anuz (2018)

View more