Materials Science and Engineering

RAFT agent primed mesoporous silica particles for selective grafting of polymer chains and their applications

Mishra, Smrutirekha (IIT Delhi, 2021)

Studies on poly(lactic acid) and polyacrylate based anisotropic microparticles modified with polymer brushes

Ifra (IIT Delhi, 2021)

Interrelationship of morphological, rheological, thermomechanical and electrical behaviours in polyamide 12/ polypropylene–mwcnt nanocomposites

Sethy, Sucharita (IIT Delhi, 2021)

In situ microscopic tribology of near eutectic Al-Si alloy under boundary lubricated conditions

Mittal, Prashant (IIT Delhi, 2021)

Thermomechanical processing and deformation behavior of binary Mg-Y alloys with varied Y concentration

Ansari, Nooruddin (IIT Delhi, 2021)

Studies on curing kinetics and thermal behavior of phthalonitrile resin using aromatic amines

Devendra Kumar (IIT Delhi, 2021)

Micro and nano-scale tribology of Mg-9Al1Zn magnesium alloy under dry and lubricated conditions

Deepak Kumar (IIT Delhi, 2021)

Alloying and pre-deformation effects on the aging response of FCC based Co1.5CrFeNi1.5 high entropy alloys with varying Ti and Al contents

Nandal, Vickey (IIT Delhi, 2021)

Deformation and static recrystallization behavior of extruded pure magnesium under strain path change

Mohapatra, Shanta (IIT Delhi, 2021)

Influence of texture and temperature on the small-scale mechanical behavior in zinc

Gokhale, Aditya (IIT Delhi, 2021)

Design and synthesis of iminodiacetate-styrene based chelating polymeric materials for water purification

Tyagi, Reshu (IIT Delhi, 2021)

Studies on granular tapioca starch and jack wood flour reinforced poly(ε-caprolactone) based biocomposites

Achla (IIT Delhi, 2018)

TEMPO initiated thiol-ene reaction as an efficient conjugation method for the preparation of functionalized polymers and surfaces

Hafeez, Sumbul (IIT Delhi, 2020)

Studies on poly(lactic acid) based biodegradable microparticles for prolonging shelf-life of food

Biswal, Agni Kumar (IIT Delhi, 2020)

Effect of strain path change on static recrystallization behavior of cold deformed Mg-6AI-3Sn Magnesium alloy

Gaurav (IIT DELHI, 2020)

Studies on glass fiber fabric/epoxy self-healing composites

Sharma, Shilpi (IIT Delhi, 2019)

Design and synthesis of truxene based solution processable blue emitting materials for organic electronics

Kaur, Banpreet (IIT Delhi, 2019)

Foamability of polypropylene and its blends with ethylene acrylic elastomer modified by gamma radiation

Dutta, Anindya (IIT Delhi, 2019)

Rheology of shear thickening fluids and their effect on energy dissipation of impregnated fabrics

Swarna (IIT, Delhi, 2019)

Studies on halloysite and sepiolite reinforced high density polyethylene nanocomposites

Singh, Vishwa Pratap (2018)

Studies on performance composites based on poly(ether ketone) for electromagnetic interference shielding applications

Chauhan, Sampat Singh (2018)

Studies on polylactide based blends and nanocomposites

Nehra, Ranjana (2018)

Studies on CO2-induced crystallization and foaming behaviour of poly(lactic acid)/clay nanocomposites

Sabapathy S (2018)

Synthesis, characterization and evaluation of polypyrrole based nanocomposites for electromagnetic shielding application

Gahlout, Pragati (2018)

Studies on filled acrylate based dental restorative composites

Harshita (2018)

Studies on poly(l-lactide) based block copolymers and blends

Konwar, Debanga Bhusan (2018)

Studies on the foaming behaviour of sebs based blends and nanocomposites

Banerjee, Ritima (2018)

Synthesis,characterisation and properties of poly(urethane methacrylates)

Tyagi, Alok Kumar (IIT Delhi, 1992)

Tribological properties of some Fe,Co and Ni based metallic glasses

Braham Prakash (IIT Delhi, 1993)