Centre for Polymer Science and Engineering [CPSE]
Browse by
Recent Submissions
-
Copolymerization of methyl methacrylate and urethane methacrylate—II
(1992)A methacrylate monomer (MAUN) having a pendant urethane linkage was prepared by reacting tolylene diisocyanate (TDI), 2-naphthol and 2-hydroxyethyl methacrylate (HEMA). Photopolymerization in the absence of photosensitizer ... -
Copolymerization of methyl methacrylate and a novel allyl monomer
(1992)A novel monomer (TEP) having pendant carbamate groups was prepared by reacting equimolar quantities of 4-allyl-2-methoxyphenyl and phenol with tolylene diisocyanate (2,4- and 2,6-isomers). TEP was copolymerized with methyl ... -
Influence of weave of glass fabric on the oscillating wear performance of polyetherimide (PEI) composites
(2002)Glass fabric of three weaves (plain, twill and woven) was selected as reinforcement for developing composites based on polyetherimide matrix. One more composite containing additional fillers (PTFE and Cu powder) was also ... -
Effect of structure on thermal behaviour of epoxy resins
(2002)The paper deals with the curing behaviour of diglycidyl ether of bisphenol-A (DGEBA) using three novel multifunctional aromatic amines having phosphine oxide and amide–acid linkages. The amines were prepared by reacting ... -
Ionomer compatibilised PA6/EVA blends: mechanical properties and morphological characterisation
(2003)The compatibilisation of PA6/EVA blends with the addition of an ionomer on the mechanical properties and morphology were studied as a function of ionomer concentration with the primary aim of enhancing the impact strength ... -
Study of the oxygen incorporation and structure in the low pressure sputtered YBCO films
(2003)Epitaxial thin films of YBa2Cu3O7–δ (YBCO) have successfully been grown by reactive RF-magnetron sputtering technique at a low pressure (0.95 mTorr) with TC (R=0)=85.3 K and JCmag (4.2 K)≈2×107 Å/cm2. The incorporation of ... -
Crystallization kinetics and morphological behavior of reactively processed PBT/epoxy blends
(2003)Polybutylene terephthalate (PBT), a versatile engineering thermoplastic, has been processed using epoxy resin as a reactive solvent. Following processing of this blend, the epoxy was cured using a bi-functional amine curing ...
RSS 1.0